清洗凈化鋁材配件-膠盒油漬的具體方法
- 發布人：
- 發布日期：2017-04-13 17:48:23
潔凈室膠盒的清洗越來越被人們所重視，在現代高科技年代，高科技產品的生產制造離不開潔凈室，生產時盛裝這些精密產品的零部件就更離不開潔凈膠盒，這些膠盒根據各公司規模不同，每月使用量從幾千套到幾十萬套不等，然而有些公司不知如何清洗再利用而將它們丟棄，第一造成高包裝成本，第二廢料處理帶來環境問題。
Cleaning clean room plastic box is more and more valued by people, in the modern age of high-tech and high-tech products production manufacturing is inseparable from the cleanroom, production containing parts of these sophisticated products more inseparable from the clean plastic box, these plastic box depending on the size of the company, the monthly usage to hundreds of thousands of sets of ranging from several thousand sets, however some companies do not know how to clean the reuse and discard them, the first cause high cost of packaging, the second waste treatment brought about environmental problems.
這幾年來，很多公司已開始將膠盒循環清洗后在使用，因為經專業洗后的膠盒與新膠盒在使用上沒有差別，不僅節省生產包裝成本，而且節約原料資源及更好的保護了環境。
Over the last few years, many companies have begun to use the plastic box after washing, because the professional wash after the plastic box and the use of the new plastic box is not different, not only save the cost of production and packaging, but also save the raw material resources and better protect the environment.
對于專業膠盒清洗公司來說，最希望清洗的膠盒是干凈無污的新膠盒，而周轉膠盒特別是在拉周轉膠盒的清洗往往是“令人痛苦”的。因為有些在拉周轉膠盒會因各種意圖而貼上膠紙、染上筆印，或沾上機油和潤滑油等，直接導致的后果就是膠盒上常常殘留有筆跡、膠漬及油印，這些膠漬及油印太過微觀、污染部位隨機，以致難以發現、難以清除。清洗這些膠盒不僅耗費的工時多，而且清洗后的品質較難保證，因而成為清洗公司一塊“難啃的骨頭”。
For professional plastic box cleaning company, the most want to clean the plastic box is clean and no pollution of the new plastic box, and the turnover of plastic boxes, especially in the case of the pull turnover plastic box is often a "painful". Because some pull plastic turnover box would for all intents and stick adhesive tape, pen printing dye, or stained with oil and lubricating oil etc., led directly to the consequence is plastic box often residual handwriting, glue stains and mimeograph, the glue stains and mimeograph too micro, contaminated parts of the randomized, so that it is hard to find, difficult to remove. Wash these plastic boxes not only spent more hours, but also the quality of the more difficult to ensure, and thus become a cleaning company a hard nut to bite".
不久前，有個客戶的膠盒在我們公司清洗后，客戶抽檢時發現工件部位上的油印沒洗干凈。 到客戶現場了解情況時，發現這種膠盒是黑色防靜電膠盒，塊頭較大，在其工件部位上有不易發現的潤滑油印，須在充足的光線下傾斜至一定角度才可發現。因為客戶事先并無對來料狀況作特殊說明，在來料檢查時也未發現此種不良，所以清洗時并未做特殊處理，僅按正常來料清洗流程清洗。結果導致整批貨全部被退回返工。
Not long ago, a client of the plastic box in our company after cleaning and sampling of customers find mimeograph workpiece position did not wash clean. To the customers at the scene and found the glue box is black anti-static plastic box, bigger, on the site of the workpiece is not easily found in the lubrication mimeograph, shall be in sufficient light inclined to a certain angle can be found. Because the customer has no prior to the special description of the material, in the incoming inspection also found that such a bad, so do not do special treatment, only according to the normal cleaning process. The results lead to the whole lot of the goods were returned to the rework.
對被退回的膠盒重新檢查時，發現80~90%的膠盒都有油印，嚴重的幾乎每處工件位上都有，且膠盒面積大，數量多，又是ESD材質，用正常的IPA加抹布擦拭方法行不通。一是進展太慢，客戶要貨急；二是IPA對ESD涂層會有腐蝕作用。經過反復清洗試驗，終于找出了解決方法，就是將中性清洗劑MP、堿性清洗劑BC和水按適當比例混合后配成新溶劑，將有油膠盒放入其中進行短時間浸泡后用專用刷刷洗片刻，再用DI水沖淋，最后進入正常清洗工序清洗，清洗之后的膠盒經OQC檢查后OK，油印被清除。
Of returned plastic box to check and found that 80-90% of the plastic box has a mimeograph, serious almost every workpiece position is, and plastic box area big, quantity and ESD material, with normal IPA and rag wipe doesn't work. One is that progress is too slow, customers want to rush; two is IPA on the ESD coating will have a corrosive effect. After repeated cleaning test, finally find out solutions, is the neutral cleaning agent MP, alkaline cleaning agent BC and water in certain proportion are mixed with new solvent, there will be oil, plastic boxes into the soaking time is short after use special cleaning brush for a moment, then DI water shower, finally entered the normal cleaning process cleaning, after cleaning the plastic box by OQC check OK, mimeograph is cleared.
凈化鋁材配件 http://www.jnjkjh.com/
凈化鋁材配件 http://www.jnjkjh.com/
