凈化鋁材配件-膠盒有油的清洗流程
- 發布人：
- 發布日期：2017-04-13 17:38:46
來料檢查：除正常檢查項目外，增加油檢。設備有放大鏡，顯微鏡、專用吸油紙等。一旦查到有油，將本批貨隔離開來，做上標記，并送樣給客戶確認。
Incoming inspection: except for normal inspection items, increase the oil inspection. Equipment has a magnifying glass, microscope, special oil absorbing paper, etc.. Once found the oil, the goods will be separated from the goods, to make the mark, and to send the sample to confirm.
預清潔：對有油膠盒先進行外觀檢查，并清除可見污漬、筆跡及膠漬等。在凈化鋁材配件 http://www.jnjkjh.com/ 的操作中應注意與正常料所用工具及場所區分開來。
Pre cleaning: the first appearance of the oil plastic box to check, and the removal of visible stains, handwriting and rubber stains, etc.. In the purification of aluminum parts of the operation should be noted that the use of tools and places to distinguish between normal.
去油：對有油膠盒采用特殊除油清洗程序。
Oil: on oil glue box adopts special degreasing cleaning procedures.
自動拉清洗：對有油膠盒進行自動清洗，清洗之后拉中的水及溶液要全部換掉，以免交叉污染正常料。
Automatic cleaning: to have the oil plastic box for automatic cleaning, after cleaning the water and the solution to be completely replaced, so as to avoid cross contamination.
制程/出貨檢查：清洗完后進行抽檢，用放大鏡、顯微鏡、吸油紙等。
Process / outgoing inspection: after cleaning the sampling, with a magnifying glass, microscope, oil absorbing paper, etc..
包裝出貨：在包裝時要在標簽上注明有油，以便客戶區分和追溯。
Packaging: in the packaging to be marked on the label with oil, so that customers distinguish and trace.
